EMINENCE DELTA 10B 10" , 16OHM SPEAKER SVT1540HE

DELTA 10B

EMINENCE DELTA 10B, 10" , 16 OHM SPEAKER. RATED AT 350 WATTS PEAK. BEST TONE AND RELIABILITY. AS USED IN OUR 410 BASS CABINETS. EXCELENT GENERAL REPLACEMENT FOR  410 CABS.
GOOD REPLACEMENT FOR AMPEG SVT1540HE.

SPECIFICATION   
Nominal Basket Diameter  10", 254mm
Nominal Impedance*  16 ohms
Power Rating   
Watts 350W
Music Program  700W
Resonance 65Hz
Usable Frequency Range  71Hz-3.7kHz
Sensitivity*** 98
Magnet Weight  56 oz.
Gap Height  0.375", 9.53mm
Voice Coil Diameter 2.5", 63.5mm
   
THIELE & SMALL PARAMETERS   
Resonant Frequency (fs)  65Hz
DC Resistance (Re)  11.6
Coil Inductance (Le)  0.79mH
Mechanical Q (Qms)  8.34
Electromagnetic Q (Qes)  0.35
Total Q (Qts)  0.33
Compliance Equivalent Volume (Vas)  36 liters / 1.27 cu.ft.
Peak Diaphragm Displacement Volume (Vd)  62cc
Mechanical Compliance of Suspension (Cms)  0.21mm/N
BL Product (BL)  19.5 T-M
Diaphram Mass inc. Airload (Mms)  28 grams
Efficiency Bandwidth Product (EBP)  186
Maximum Linear Excursion (Xmax)  1.8mm
Surface Area of Cone (Sd)  344.9 cm2
Maximum Mechanical Limit (Xlim)  9.0mm
   
MOUNTING INFORMATION     
Recommended Enclosure     
Sealed 9.9-12.7 liters/0.35-0.45 cu.ft.  
Vented 10.8-34 liters/0.38-1.2 cu.ft.  
Overall Diameter  10.09", 256.2mm  
Baffle Hole Diameter  9.15", 232.4mm  
Front Sealing Gasket  Fitted as standard  
Rear Sealing Gasket  Fitted as standard  
Mounting Holes Diameter  0.25", 6.4mm  
Mounting Holes B.C. D.  9.66", 245.4mm  
Depth 4.25", 108mm  
Net Weight  10.8 lbs., 4.9 kg  
Shipping Weight  11.9 lbs., 5.4 kg  
     
MATERIALS OF CONSTRUCTION     
Coil Construction  Copper voice coil  
Coil Former Polyimide former  
Magnet Composition  Ferrite magnet  
Core Details  Vented core  
Basket Materials  Pressed steel basket  
Cone Composition  Paper Cone  
Cone Edge Composition  Cloth cone edge  
Dustcap Composition Solid composition paper dust cap

$ 135.00

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.