EMINENCE LEGEND 1028K 10", 8 OHM, 35 WATT SPEAKER

LEGEND 1028

A VERY BLUESY SPEAKER WITH LOTS OF SPARKLE, DEFINITION, AND PERCUSSIVE CHARACTERISTICS.



SPECIFICATION   
Nominal Basket Diameter  10", 254mm
Nominal Impedance*  8 ohms
Power Rating   
Watts 35W
Music Program  N/A
Resonance 95Hz
Usable Frequency Range  100Hz-5.5kHz
Sensitivity*** 97.4
Magnet Weight  6 oz.
Gap Height  0.25", 6.2mm
Voice Coil Diameter 1", 25.4mm
                
THIELE & SMALL PARAMETERS         
Resonant Frequency (fs)  95Hz  
DC Resistance (Re)  5.8  
Coil Inductance (Le)  0.51mH    

Mechanical Q (Qms)  17.96
Electromagnetic Q (Qes)  1.61
Total Q (Qts)  1.47
Compliance Equivalent Volume (Vas)  31.5 liters / 1.1 cu.ft.
Mechanical Compliance of Suspension (Cms)  0.19mm/N  
BL Product (BL)  5.7 T-M  
Diaphram Mass inc. Airload (Mms)  15 grams  
Efficiency Bandwidth Product (EBP)  59  
Maximum Linear Excursion (Xmax)  2.1mm  
Surface Area of Cone (Sd)  344.9 cm2  
Maximum Mechanical Limit (Xlim)  N/A  
     
MOUNTING INFORMATION     
Recommended Enclosure     
Sealed Acceptable  
Vented Acceptable  
Overall Diameter  10.11", 256.8mm  
Baffle Hole Diameter  9.05", 229.9mm  
Front Sealing Gasket  Fitted as standard  
Rear Sealing Gasket  N/A  
Mounting Holes Diameter  0.22", 5.6mm  
Mounting Holes B.C. D.  9.6", 243.8mm  
Depth 4.8", 122mm  
Net Weight  2.9 lbs., 1.3 kg  
Shipping Weight  4 lbs., 1.8 kg  
     
MATERIALS OF CONSTRUCTION     
Coil Construction  Copper voice coil  
Coil Former Polyimide former  
Magnet Composition  Alnico magnet  
Core Details  Non-vented core  
Basket Materials  Pressed steel basket   
Cone Composition  Paper Cone  
Cone Edge Composition  Paper cone edge  
Dustcap Composition Solid composition felt dust cap


 

$ 129.00

Quantity :

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.