EMINENCE LEGEND B810 32OHM/150W 10" SPEAKER FOR SVT 810, HE

LEGEND B810

NEW! MODELED AFTER THE VINTAGE 70'S SVT SPEAKERS, THE B810 IS RATED 150W AT 32 OHMS.  USE AS UPGRADE FOR  YOUR VINTAGE CABS AND AS DIRECT REPLACEMENT FOR THE MODERN  CABS. ALSO USED IN SOME 410HE MODELS.


Use as  replacement 86-032-01 (810E and 410HE)
Nominal Basket Diameter  10", 254mm
Nominal Impedance*  32 ohms
Power Rating   
Watts 150W
Music Program  300W
Resonance 52Hz
Usable Frequency Range  49Hz-5.1kHz
Sensitivity*** 92.7
Magnet Weight  30 oz.
Gap Height  0.312", 7.94mm
Voice Coil Diameter 2", 50.8mm
              
THIELE & SMALL PARAMETERS        
Resonant Frequency (fs)  52.07Hz  
DC Resistance (Re)  27.5  
Coil Inductance (Le)  2.72mH     
      Download PDF Spec Sheet 
 
Mechanical Q (Qms)  13.91
Electromagnetic Q (Qes)  0.68
Total Q (Qts)  0.65
Compliance Equivalent Volume (Vas)  66.4 liters / 2.34 cu.ft.
Mechanical Compliance of Suspension (Cms)  0.39mm/N  
BL Product (BL)  17.8 T-M  
Diaphram Mass inc. Airload (Mms)  23.8 grams  
Efficiency Bandwidth Product (EBP)  76.8  
Maximum Linear Excursion (Xmax)  4.7mm  
Surface Area of Cone (Sd)  350.1 cm2  
Maximum Mechanical Limit (Xlim)  9.5mm  
     
MOUNTING INFORMATION     
Recommended Enclosure     
Sealed 14-35 liters / 0.5-1.3 cu.ft.  
Vented 45.76 liters / 1.6-2.7 cu.ft.  
Overall Diameter  10.11", 256.8mm  
Baffle Hole Diameter  9.13", 231.9mm  
Front Sealing Gasket  Fitted as standard  
Rear Sealing Gasket  Fitted as standard  
Mounting Holes Diameter  0.23", 5.7mm  
Mounting Holes B.C. D.  9.60", 243.8mm  
Depth 4.08", 103.6mm  
Net Weight  6.7 lbs, 3.04 kg  
Shipping Weight  7.9 lbs, 3.6 kg

$ 109.00

Quantity :

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.