EMINENCE PRIVATE JACK-16 12", 16 OHM, 50W SPEAKER N/A

PRIVATE JACK

THICK AND SMOOTH, WITH LOTS OF MIDS AND EXTENDED HIGHS. VERY WELL BALANCED SPEAKER. CLASSIC BRITISH FLAVOR.

SPECIFICATION   
Nominal Basket Diameter  12", 304.8mm
Nominal Impedance*  16 ohms
Power Rating   
Watts 50W
Music Program  N/A
Resonance 101Hz
Usable Frequency Range  70Hz-5.5kHz
Sensitivity*** 100.3
Magnet Weight  38 oz.
Gap Height  0.312", 7.92mm
Voice Coil Diameter 1.75", 44.5mm
                SOUND CLIPS
THIELE & SMALL PARAMETERS          Clean    Heavy    OD
Resonant Frequency (fs)  101Hz  
DC Resistance (Re)  14.0  
Coil Inductance (Le)  0.77mH     
      Download PDF Spec Sheet 
 
Mechanical Q (Qms)  12.69
Electromagnetic Q (Qes)  1.11
Total Q (Qts)  1.02
Compliance Equivalent Volume (Vas)  35.9 liters / 1.3 cu.ft.
Mechanical Compliance of Suspension (Cms)  0.09mm/N  
BL Product (BL)  14.6 T-M  
Diaphram Mass inc. Airload (Mms)  27 grams  
Efficiency Bandwidth Product (EBP)  91  
Maximum Linear Excursion (Xmax)  1.2mm  
Surface Area of Cone (Sd)  519.5 cm2  
Maximum Mechanical Limit (Xlim)  N/A  
     
MOUNTING INFORMATION     
Recommended Enclosure     
Sealed Acceptable  
Vented Acceptable  
Overall Diameter  12.02", 305.3mm  
Baffle Hole Diameter  10.97", 278.6mm  
Front Sealing Gasket  Fitted as standard  
Rear Sealing Gasket  Fitted as standard  
Mounting Holes Diameter  0.25", 6.4mm  
Mounting Holes B.C. D.  11.63", 295.4mm  
Depth 5.1", 130mm  
Net Weight  8 lbs., 3.6 kg  
Shipping Weight  9.8 lbs., 4.5 kg  
     
MATERIALS OF CONSTRUCTION     
Coil Construction  Copper voice coil  
Coil Former Paper former  
Magnet Composition  Ferrite magnet  
Core Details  Non-vented core  
Basket Materials  Pressed steel basket   
Cone Composition  Paper Cone  
Cone Edge Composition  Paper cone edge  
Dustcap Composition Zurette dust cap

NOT AVAILABLE

$ 115.00

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.