JENSEN MOD10-35 10", 8 OHM, 35W SPEAKER

MOD 10-35

WARM, STRAIGHTFORWARD TONE AND TIGHT BASS FREQUENCIES. WHEN PRESENTED WITH OVERDRIVE DISTORTION, IT TAKES ON A GRITTY EDGE.

General Characteristics 
Nominal Overall Diameter  259 mm  10 in 
Nominal Voice Coil Diameter  25 mm  1 in 
Magnet Weight  270 g  10 oz 
Overall Weight  2.50 lbs 
Flux Density  1.10 T 

Thiele-Small Parameters 
Voice Coil DC Resistance  RE  6.70 Ω 
Resonance Frequency  ƒS  107 Hz 
Mechanical Q Factor  QMS  18.85
Electrical Q Factor  QES  1.93 
Total Q Factor  QTS  1.75
Mechanical Moving Mass  MMS  14.9 g 
Mechanical Compliance  CMS  150.0 µm/N 
Force Factor  BxL  5.98 Wb/m 
Equivalent Acoustic Volume  VAS  23 lt. 
Maximum Linear Displacement  XMAX  1.5 mm 
Reference Efficiency  nO  1.39 % 
Diaphragm Area  SD  330 cm2 
Losses Electrical Resistance  RES  38 Ω 
Voice Coil Inductance @ 1kHz  LE  0.52 mH 

Constructive Characteristics 
Magnet  Ferrite 
Voice Coil Winding  Copper 
Voice Coil Former  Kapton 
Cone  Paper 
Surround  Integrated Paper
Dust Dome  Non Treated Cloth 
Basket  Pressed Sheet Steel 

Electrical Characteristics 
Nominal Impedance  8 Ω 
Rated Power  35 W 
Musical Power  70 W 
Sensitivity@1W,1m  94.1 dB

$ 50.00

Quantity :

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.