JENSEN MOD 12-110 12", 16 OHM, 110W SPEAKER

MOD 12-110

STRONG, PUNCHY, AND ARTICULATE WITH EMPHASIS ON THE MIDS. IT RESPONDS TO OVERDRIVE DISTORTION WITH A TIGHT AND BALANCED FUZZ THAT REMAINS STRONG AND STRAIGHTFORWARD.

General Characteristics 
Nominal Overall Diameter  307 mm  12 in 
Nominal Voice Coil Diameter  50 mm  2 in 
Magnet Weight  1450 g  50 oz 
Overall Weight  9.55 lbs 
Flux Density  1.25 T 

Thiele-Small Parameters 
Voice Coil DC Resistance  RE  7.12 Ω 
Resonance Frequency  ƒS  85.6 Hz 
Mechanical Q Factor  QMS  14.23
Electrical Q Factor  QES  0.51
Total Q Factor  QTS  0.49
Mechanical Moving Mass  MMS  30.5 g 
Mechanical Compliance  CMS  114 µm/N 
Force Factor  BxL  15.16 Wb/m 
Equivalent Acoustic Volume  VAS  38.4 lt. 
Maximum Linear Displacement  XMAX  1.0 mm 
Reference Efficiency  nO  4.56 % 
Diaphragm Area  SD  490.8 cm2 
Losses Electrical Resistance  RES  199.6 Ω 
Voice Coil Inductance @ 1kHz  LE  0.99 mH 

Constructive Characteristics 
Magnet  Ferrite 
Voice Coil Winding  Copper 
Voice Coil Former  Nomex
Cone  Paper 
Surround  Integrated Paper
Dust Dome  Non Treated Cloth 
Basket  Pressed Sheet Steel 

Electrical Characteristics 
Nominal Impedance  16 OHM
Rated Power  110 W 
Musical Power  220 W 
Sensitivity@1W,1m  99.1 dB

$ 129.00

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.