JENSEN P10Q 10", 8 OHM, 40W SPEAKER

P10Q

WARM TONE WITH SOME BITE IN THE MID FREQUENCIES WHICH TRANSLATES INTO A FIERCE RESPONSE TO OVERDRIVE DISTORTION.

General Characteristics 
Nominal Overall Diameter  259 mm  10 in 
Nominal Voice Coil Diameter  32 mm  1.25 in 
Magnet Weight  300 g  10.5 oz 
Overall Weight  3.65 lbs 
Flux Density  1.05 T 

Thiele-Small Parameters 
Voice Coil DC Resistance  RE  6.00 Ω 
Resonance Frequency  ƒS  88.0 Hz 
Mechanical Q Factor  QMS  10.26
Electrical Q Factor  QES  1.27
Total Q Factor  QTS  1.13
Mechanical Moving Mass  MMS  15.7 g 
Mechanical Compliance  CMS  208 µm/N 
Force Factor  BxL  6.63 Wb/m 
Equivalent Acoustic Volume  VAS  31.8 lt. 
Maximum Linear Displacement  XMAX  1.0 mm 
Reference Efficiency  nO  1.65 % 
Diaphragm Area  SD  330.0 cm2 
Losses Electrical Resistance  RES  51.8 Ω 
Voice Coil Inductance @ 1kHz  LE  0.74 mH 

Constructive Characteristics 
Magnet  AlNiCo
Voice Coil Winding  Copper 
Voice Coil Former  Nomex
Cone  Paper 
Surround  Integrated Paper
Dust Dome  Solid Paper
Basket  Pressed Sheet Steel 

Electrical Characteristics 
Nominal Impedance  8 Ω 
Rated Power  40 W 
Musical Power  80 W 
Sensitivity@1W,1m  95.1 dB

$ 149.00

Quantity :

Powered by Fission Content Management System | Buffalo Website Design by 360 PSG
This site has no official connection with the current Ampeg company. Ampeg is a registered trademark of the SLM corporation with all rights reserved.